PET polyester strapping automatic winder with automatic Palletizing
System
Palletizing program:
A: Strap OD 600MM, height 150MM, weight 20KG, 1 layer of 4, separated by
cardboard, up to 12 layers.
B: Strap O.D. 800MM, height 190MM, weight 75KG, 1 layer of 2, cardboard
separated, up to 7 layers.
Robot arm model: JZJ160A-270
Speed: 40 seconds per roll, an automatic palletizing system can match up to 2 sets of one out 8 PET strap production lines.
Cardboard platform dimensions: length 1240mm x width 1240mm x
height 1500mm
Positioning conveyor belt size: length 3220mm x width 1170mm x
height 680mm
Robot arm base: length 700mm x width 700mm x height 1000mm
After the finished product arrives at the positioning position of
the conveyor belt, the robotic arm grabs the finished product onto
the pallet until one layer is full. The robotic arm then picks up
the cardboard finished product pallet from the cardboard pallet and
repeats the action until the finished product pallet is stacked.
CQA800F suitable for one out of six, one out of eight PET strap
production line with robotic arm use.
The strap winder of the CQA800F was used for winding straps in
parallel directly from the extruder.
The systems work independently once the material has been applied
manually. They can be integrated into fully automated overall
production plant. They wind pet straps
With width of 9~32mm depending on configuration.
Once a winding package has reached the desired circumference, it is
wrapped with film by the intergrated winder and tipped by the
integrated transport system from the winder down to the roller
conveyor below. A new winding tube is fed from the magazine at the
same time and the next package is wound fully automatically.
The machines were developed for continous operation. The compact
design permits use even in confined spaces.
Facts and advantages
fully automatic PET strap winder for straps from 9 to 32 mm, with an outer package diameter of 820 mm
conveyor system for automatic package transport
film wrapping device for automatic package wrapping
central input terminal with recipe management
Fully automatic winding can be achieved with or without paper core
| CQA800F |
| Winding speed | 50 – 250 m/min |
| Maximum pick up speed | 350 m/min |
| Maximum mandrel rotation speed | 500 m/min |
| Strap width | 9~32mm |
| Traverse length | 50~200mm |
| Mandrel diameter | 406mm or customized |
| Maximum package diameter | 820 mm |
Basic equipment
Dancer control for controlling a constant strap tension and winding speed, Dual servo motor
Precise, electronically controlled 2 or 3 point laying with minimal
strap bend of the straps
Pneumatic lamella spreading mandrels for fast bobbin change
Sleeve magazine
Bobbin deposit
Automatic film dispenser
Two measurement modes: weight and meter
Default Main configuration
1) Motor: Wuxi Xinjie main motor 1.5KW, speed ratio: 1:8, servo motor,
Wuxi Xinjie Traverse motor: 400W servo motor
2) PLC: Wuxi Xinjie Touch screen: Wuxi Xinjie Contactor: Schneider
3) Pneumatic components: solenoid valve and pressure gauge: Taiwan
Yadeke, cylinder: Donghao Pneumatic (Wenzhou)
4)Sensors and proximity on/off lights: Korea Alto Nicks
